- Sku: RER17043
1/10 RDS RWD Competition Spec Drift Car RTR Gray
Description
Redcat RDS - Brushless Rear Wheel Drive Electric Drift Car
The Redcat RDS 1/10 2WD Ready to Run Brushless Drift Car is designed for peak performance on many different surfaces. The RDS is an advanced competition spec drift car that is a great choice for both advance and beginner drift enthusiasts. The carbon fiber chassis comes out of the box for polished concrete and p-tile surfaces. With the included brushless electronic, the Redcat RDS and prepare for some sick sideways action.
The RDS chassis is completely adjustable allowing the user to fine tune the chassis to best suit your driving style and surface. The motor plate can be mounted in three different positions, altering the car’s chassis roll and weight bias. This can adjust the amount of traction and chassis roll the RDS has on different surfaces. The RDS has multiple steering link positions and a sliding Ackermann plate, making it easy to fine tune the Ackermann. The RDS is loaded with tuning capabilities that will suit even the most advanced drivers.
The included RDS body not only looks amazing, but it is ready to accept an LED light kit (LEDs sold separately). With magnetic body mounts, this adds an element of extreme detail keeping those body clips out of the picture. The RDS has two front light buckets and four rear light buckets.
NOTE:
- The depicted decals and battery shown in the photo are for illustrative purposes only. The RDS you receive will require the decals to be added. The battery is sold separately.
- Redcat recommends the user checks the steering endpoints through the drift gyro prior to use. Please check with the user manual to perform this.
- Competition spec drift car chassis
- Adjustable camber, caster, toe, Ackermann, roll center, wheelbase, and center of gravity
- Magnetic body mounts as standard equipment
- Includes carbon fiber chassis, front and rear shock tower, and top deck!
- Brushless 540 3300kV Motor
- Powerful 60A ESC
- Accepts 2S Shorty packs or 2S Stick packs
- Includes a HexFly GX-1 Drift Gyro and Drift Spec Servo
- HDPE Drift Tires with scale nut covers
- LED ready with front and rear light buckets
- Includes decal sheets to add your custom style
Scale: 1/10
Length: 360mm
Width: 200mm
Height: 112mm
Wheelbase: 260mm
Ground Clearance: 4.5mm
Includes:
- (1) Redcat RDS 1/10 2WD RTR Brushless Drift Car
- (1) 2.4GHz radio system
- (4) AA Batteries for Transmitter
- 2S Shorty/Stick Pack Battery with T-Style connector
- Compatible Charger
| Battery | Sold Separately |
|---|---|
| Wheel Width | 1.02362" (26mm) |
| Motor Type | Brushless |
| Shock Type | Aluminum Body Oil Filled |
| Completion Level | Ready-To-Run |
| Motor Size | 3300KV RC540 Brushless Motor |
| Internal Gear Ratio | 2.6 |
| Radio | Included |
| Chassis | Carbon Fiber Upper and Lower Deck |
| Vehicle Type | Drift Car |
| Final Drive Ratio | 8.8 |
| Product Width | 8.58268" (218 mm) |
| Servos | Included |
| Inner Tire / Outer Wheel Diameter | 2.0 in |
| Steering Type | 2WS |
| Product Height | 4.92126" (125 mm) |
| Drivetrain | 2WD |
| Charger | Sold Separately |
| Wheelbase | 10.1181" (257 mm) |
| Body | Pre-Painted Polycarbonate |
| Scale | 1/10 |
| Drive Type | Forward/Brake/Reverse |
| Vehicle Size | Standard |
| Product Length | 17.5197" (445 mm) |
| Receiver | Included |
| Suspension | 4 Coil Over Shocks / Sliding Adjustable Ackerman |
| Speed Control | Included |
| Product Weight | 1136g (2.514 LBS) |
1/10 RDS RWD Competition Spec Drift Car RTR Gray