- Sku: EFLA1010
10-Amp Pro BEC Brushless ESC: JST
$43.99 CAD
Shipping calculated at checkout.
Description
Key Features
- Up to 10-amp continuous current with proper air flow
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low-voltage cutoff with settings for 2-cell Li-Po (6V), 3-cell Li-Po (9V) or 70% of battery starting voltage
- Programmable throttle input range (1.1ms–1.9ms or Auto Select)
- Auto motor shutdown if signal is lost or there is interference
- Programmable timing—2 user-selectable ranges for use with a large variety of brushless motors
- Pre-wired connectors—JST on battery input and 2mm female gold bullets on motor output leads
- Soft start
Overview
This controller has been designed for use in radio control aircraft and to support continuous currents of up to 10 amps when using 2–3 cell Li-Po battery packs and up to 4 sub-micro servos. Standard features include advance BEC and safe power-arming along with programmable features such as low-voltage cutoff, braking, timing and throttle input range.
Programmable | Yes |
---|---|
Amperage | 20 & Under |
Output Connector | 2mm Bullet |
Maximum Burst Current | 12A (15 sec) |
Brakes | Yes - Programmable |
Connector Type | JST |
Part Type | Electronics |
![10-Amp Pro BEC Brushless ESC: JST](http://rickyshobbycorner.ca/cdn/shop/products/EFLA1010_A0_PORX34XV.jpg?v=1709235060&width=1445)
10-Amp Pro BEC Brushless ESC: JST
$43.99 CAD