- Sku: EFLA1030B
30-Amp Pro Switch-Mode BEC Brushless ESC V2: EC3
$94.99 CAD
Shipping calculated at checkout.
Description
Key Features
- Up to 30 amps continuous current with proper air flow and 35 amps burst current (15 seconds)
- 3.5A continuous current, 5V Switch-Mode BEC Circuit
- Stronger BEC for support of most 3-axis stabilization systems
- Drive up to 7 analog or 6 digital standard-size servos with the BEC
- 3- to 4-cell Li-Po, 9- to 12-cell Ni-MH/Ni-Cd input voltage
- Programmable motor braking
- Safe power-arm mode prevents accidental starts
- Programmable low voltage cutoff with settings for 3-cell Li-Po (9.2V), 4-cell Li-Po (12V) or 74% of battery starting voltage
- Programmable throttle input range (1.1ms–1.9ms or 1.2ms–1.8ms)
- Programmable soft start for helis and airplanes
- Auto motor shut down if signal is lost or there is interference
- Programmable timing - 5 user-selectable ranges for use with a large variety of brushless motors
- Pre-wired connectors—E-flite EC3™ connector on battery input and 3.5mm gold bullet connectors on motor output leads
Overview
The E-flite® 30-Amp Pro Switch-mode BEC Brushless ESC (V2). This is a high-quality sensorless brushless electronic speed control with an integrated switch-mode BEC that is very lightweight and efficient. It can operate without the need for a separate receiver battery to power your servos and receivers, saving you weight and complication.
Maximum Burst Current | 35A |
---|---|
Programmable | Yes |
Maximum Continuous Current | 30A |
Input Voltage | 10.8?14.8V |
Part Type | Electronics |
Output Connector | 3.5mm Bullet |
BEC Voltage | 3.5A continuous |
Connector Type | EC3 |
Brakes | Yes |
![30-Amp Pro Switch-Mode BEC Brushless ESC V2: EC3](http://rickyshobbycorner.ca/cdn/shop/products/EFLA1030B_A0_IIPBBWCV.jpg?v=1709235068&width=1445)
30-Amp Pro Switch-Mode BEC Brushless ESC V2: EC3
$94.99 CAD